As a new gear product, sprocket has a high transmission speed. In its specific application process, because of its advantages of high speed, the noise generated is very small, which is also conducive to the realization of a good processing environment. In the application of sprocket, not only the installation precision is high, but also the machining precision is very ideal, which saves a lot of trouble for the future maintenance work. Moreover, the compact structure of the sprocket makes it have a large transmission ratio, and its service life is also relatively high.

1. The new sprocket is too long or elongated after use, which is difficult to adjust. The chain link can be removed according to the situation, but it must be an even number. The chain link shall pass through the back of the socket, the locking piece shall be inserted outside, and the opening of the locking piece shall be in the opposite direction of rotation.

2. Sprinket should be filled with lubricating oil in time. The lubricating oil must enter the fitting clearance between the roller and the inner sleeve to improve the working conditions and reduce the wear.

3. The old sprockets can not be mixed with some new sprockets, otherwise it is easy to produce impact in the transmission and break the sprockets.

4. When the machine is stored for a long time, the sprayer should be removed and cleaned with kerosene or diesel oil, then coated with oil or butter and stored in a dry place.