Welcome visit Xintai Xianjin mining equipment factory official website!

Site map| XML| English| China

Xintai Xianjin mining equipment factory

Focus on the chain sprocket production 30 yearsKeep advanced     pursue progress

Tel:

13953829898

The current position: Home > News > Common problem Common problem

Sawtooth link material and heat treatment process

发布时间:2019/12/24 浏览次数:

Sawtooth production and production link, use what material? A lot of people do not understand toothed ring, serrated ring name is zigzag link, commonly known as the ring gear shaving, ladder gear ring, is a kind of can use vertically, also can use level of the link. So, serrated ring are made of what material production? Because the quality of the sawtooth ring, the material has a lot to do with its use. Familiar with sawtooth ring material, can understand the quality of the toothed ring.


Sawtooth link of material and heat treatment process, to a certain extent determines the toothed ring price. And taking spectrum line of other domestic manufacturers, our company focus on high end sawtooth ring in the market, in terms of quality, reputation, a commanding lead to choose the country, it is also can be recognised by numerous national coal group.


Relative to arc tooth type connect link, serrated ring is considered to be relatively low-end products, so most manufacturers don't seriously, to its use of the material is not good. The link is scraper conveyor of coal mine scraper chain on the connecting parts, it plays an important role in the drag chain. And often friction between link chain, the wear so it is more serious. And your link chain maintenance problems should be attention. After link manufacturers to introduce you to pick up link chain oil problem.


Answer the link chain oil is not lubrication oil, should be done to protect oil, is probably time to consider the storage chain is longer, avoid rust corrosion chain, this oil is not lubrication oil.


You may have seen it some car chain, flywheel is black, a lot of oil runs out, this is taboo, it'll be a lot more typical belongs to oil, the chain is easy to paste. Run for a long time also will be more dirty, stick on the chain and the flywheel sand will together with the car turning to adjust, this will greatly increase the wear rate of the chain. With link mining on the blowing machine, and machine wear is quite serious, between user when use should pay attention to pick up the maintenance of the link.


In addition, due to the special working conditions, traction fracture phenomenon, connect link often occur once connect link is pulled, the whole equipment is paralyzed, seriously affect the normal production of coal mine. Not only economic suffer losses, and looking for chain scission and the link in the coal wall side, has certain risk, and even cause accidents. After link has high breaking capacity, in the work and requires high reliability.


Contact us

Tel:

0538-7460888 7460999

Fax:0538-7460088
Website:www.sdxjlt.com
Sales manager:xianjin JI
Phone:13953829898
WeChat:18853899608
QQ:1023734886
Email:sdxjks@163.com
Address:Officer in xintai city in shandong province sheep flow industrial west bridge