The material of the chain of the electromagnetic sucker of the chain of the ring chain is the structure of the large ring welded by manganese steel and the small ring. The chain of the electromagnetic sucker of the chain of the chain is also a type often produced in our company. Now the chain factory will introduce how to choose the chain of electromagnetic chuck.

1. The rated lifting capacity of the lifting electromagnet without special requirements shall not be greater than half of the lifting capacity (suction) of the electromagnet (coefficient is 2). When the bulk scrap is sucked and transported, the rated lifting capacity is the lifting capacity of the electromagnet (coefficient is close to 1).

2. All bolt connections of electromagnet shall be able to prevent automatic loosening.

3. The chain bar of electromagnetic iron shall be m (4) class short chain with a coefficient not less than 6.

Chain for electronic conclusion cup scrap judgment: 1. The allowable wear value of the electromagnetic chuck chain shall not exceed 10% of the rod diameter of the ring chain or the thickness of the accessories

2. If the main ring of the suction cup chain is twisted more than 10 degrees, it shall be scrapped

3. It is forbidden to use the electromagnetic chuck chain when it is cracked, bent or twisted, and the ring hinge is stuck

4. The elongation of chain and single ring of electromagnetic chuck shall not exceed 5% of the original length