Before the installation of bucket elevator chain, of course, some preparations should be done. What should be done before the installation of bucket elevator has been explained in detail before, and is not covered here. Here, the installation process of bucket elevator chain and hopper is emphasized:
1. After the bucket elevator chain and other casings are installed, install the chain and other hoppers. ① The chain and hopper of the ring chain elevator need to be connected with u-screw, which is not only the joint of the chain but also the fixed part of hopper. The connection must be firm without looseness.
② The installation of the ne plate chain is relatively simple. The ne15 bucket elevator is a single chain, and the plate chain is directly fastened with bolts and hopper (there are fixed screw holes on the ne plate chain). The bucket elevator above ne30 is double chain. When installing, place the plate chain parallel on both sides of hopper, and screw the chain and hopper one by one on the left and right sides of hopper Tight enough.
- [2019/12/24]Crane chain exactly how to maintenance and maintenance
- [2019/12/24]The development of chain industry in China sustained growth
- [2019/12/24]Mining and the use of compact chain operation meth
- [2019/12/24]Stainless steel chain is suitable for a variety of
- [2019/12/24]In the development process of chain industry problems
Mine high strength round link chain
Mining high strength compact chain
Machine in dregs carburizing wear-resisting chain
High strength lifting chain
High strength lifting sling
Stainless steel chain sprocket series
Chain bucket lift machine
High intensity mining sprocket, customized sprocket
All kinds of gb, din, and other standard chain can be customized
Mining scraper
Contact us
Tel:
0538-7460888 7460999